Cityofspartaga.org

Natural stone is not just an ordinary stone. Because at this time the existence of natural stone is highly desired by many people because it has so many functions. One of its functions is to add aesthetic value.

Increasing the aesthetic value of using natural stone is usually applied as an interior or exterior need for a building such as a house. By doing stone restoration, it can create the desired stone.

Some Interesting Facts About Stone Restoration

Be aware that there are some facts you may not know about stone restoration. Some of these facts deserve to be used as one reason to consider the selection of natural stone. Find out some interesting facts as follows.

• Make the Stone Surface Cleaner

One of the next interesting facts when doing the stone restoration is to make the surface of the stone cleaner. This step is very appropriate to do if you find a floor that is dirty and difficult to clean.

Because polishing the surface of the stone it will make all the dirt that sticks out and make it cleaner.

• No Dust

One of the interesting facts you know about stone restoration is that there is no dust attached to the natural stone. Because many people complain that they touch the fine dust that sticks to the stone.

But it must be known if the process of stone restoration uses a wet technique because it uses water. So there is no need to worry if during the process it will cause a lot of dust around the room.

Because by flushing it with water during the restoration process, it will minimize the appearance of dust and dirt from the stone.

• Make the Stones Shine Again

The second interesting fact is that you can find out by observing the stone restoration process that it can restore the shine caused by the stone. But unfortunately, many people assume that the kilos are due to the use of sealers.

It’s not. This is because it must be known that the restoration process only polishes the smooth surface rather than that so that it brings out its natural luster. The use of light is only used as a protector and not to add shine to the stone.

• Can Restore All Natural Stones

Almost everyone are using natural stone restoration process because indeed wants to bring out the shine on their floors. However, this does not mean that the stone restoration process only applies to stones on the floor.

Because all parts that use natural stone as the material can go through a stone restoration process to make it back like new. So there is also use this process to start the stone that is on the wall.

• Can Remove Scratches

An interesting fact about stone restoration is that it can remove scratches on the stone. This is precisely what makes many people use a service or instead choose to clean it.

By being aware of some of these facts, you don’t have to worry about using a new restoration service if there is a problem with your natural stone.

Read More »

Natural stone is one of the suitable materials to be used as an addition to the beauty and aesthetics of a room. This is evident from the number of people who use natural stone as a floor or wall decoration.

That’s why it is not surprising that the price of natural stone is not easy, especially if it has a good grade. Especially considering its durability, it certainly makes many people interested in using it.

Even though it has a high level of durability, that doesn’t mean that natural stone can’t be damaged. Because in fact, it turns out that natural stone can also experience scratches or dirt.

To make the stone good again, then the natural stone restoration process can be carried out. This process must of course be carried out by professionals. However, if you want to know about the systematics, you can refer to the following method regarding the process.

Steps in Restoring Natural Stone

Stone restoration means the process of restoring the condition and beauty of a stone through an appropriate process. As we said earlier, this method can only be done by professionals. Because in addition to experience, qualified equipment is also needed. To find out the stages, consider the following steps.

Grinding

The first stage is to apply the grinding method. But before doing this, you prepare the surface layer of the stone to be restored. When the surface has been prepared, it can only be milled.

This restoration process has the aim of removing or peeling scratches from the surface using mechanical abrasion. This is done to ensure that the surface of the stone can have the same flatness.

That’s why it takes a special tool such as a diamond grinder. By using this tool it will be able to bring up the reflection of light coming from the stone naturally without any coercion from the coating.

In carrying out this process, it must be done carefully, so that it becomes a natural thing if a process like this can only be carried out by experienced and professional parties to achieve the desired result.

Honing

The next step is to sharpen the surface of the stone that has scratches. As for doing this, of course, it cannot be done carelessly because it also requires special materials as the main medium.

It is necessary to have water mixed with a fine abrasive. After the mixture is perfect, it can be applied to the part where scratches or damage to stones such as granite are located.

Then on the part that has been given the previous chair mix, it will be sharpened using certain tools. Of course, this process is done to be able to eliminate some small habits as well as the former stains attached to the stone.

So it is not surprising that the results of this sharpening will be much smoother than the layer above it as before. It takes precision to make the results flat like the other parts.

Polishing

After successfully leveling the surface of natural stone using some of the methods above, the steps are not yet complete to make the process of making the stone perfect. Because several steps must be carried out such as polishing.

The polishing process has the function of being able to restore the luster of the stone that is below the outermost layer. Because we know that color or flash on a stone will certainly continue to fade if it experiences friction for a long time.

In doing this, of course, special materials are needed to be able to restore the original color of the stone. In addition to requiring special materials, of course, the process in its application must also be carried out carefully to create the desired results.

Nat Filling

The next step is to fill the grout in the cracks for the connection. So it takes a special substance to allow you to be able to fill the cracks on the surface of the natural stone.

So this way will make the surface of the natural stone look more real perfectly. Because usually it will be used to cover the surface of the stone that has collapsed and is uneven.

Coating

The last step is to do a coating or give a layer on the surface of the stone. There is no need to clarify that the coating process will involve a special material to protect the surface of the stone.

So don’t get me wrong if a reflection of light that appears from a natural stone is due to the result of this coating process. Because this layer only functions as a protector, although some do give a sparkling effect to natural stone.

Read More »

Stone becomes one of the building materials that humans have used for such a long time. Throwing back thousands of years ago, humans at that time even already used stone to build many things. The value of stones is really important for human civilization because it is a really strong material.

Throughout the years, this material stands still and even shows us that it is durable even for hundreds and thousands of years. We can still see some ancient buildings that have been built many years ago and it stands still until now.

Understanding Building Material Stones Characteristics

We all know that there are many types of stones that are usually used as building materials including limestone, greenstone, sandstones, traps, granites, and others. Each type of those stone basically has its own characteristics. However, there are some common characteristics those stones have.

The building stones are strong and durable. Those are two characteristics of building stones that answer the question of why ancient buildings are very strong and endure for such a long time. Furthermore, natural building stones have unique patterns and colors that are different from each other stone that is why they are perfect for walling.

Building a Basic Stone Wall

Building a wall stone is hard work to do and it can be done perfectly only by the professional. Unlike brick wall which uses brick as the main material that can be cut easily, the stone is really hard to cut. Once you cut it in the wrong size, you cannot use it anymore. Here are some important steps of building a basic stone wall.

1. Preparation

This first step is to prepare everything you need in building the stone wall. Start with the location where you will build the wall and prepare all the materials you need. Measure it well to know how many stones you need. In this step, you also make sure if there are lots of stones that are being cut to create a perfect wall.

2. Foundation

Before you start building the stone wall, you need a strong foundation to make your wall stands still. If you are helped by professionals, they will tell you the best measurements of the foundation. After the foundation is ready, you will have the first layer of stones on your wall.

3. First and second layers

The first layer of stone wall usually will be filled with larger stones to make sure that the stone wall stands on the strong stones. After the first layer of the wall, the stone is ready, you go with the second layer until the wall is constructed. Make sure to use the right size stone to make the wall looks precise and fine.

4. Mortar application

To keep the stones stuck to each other, builders usually use mortar. They will apply the mortar evenly around the stones. Applying the mortar cannot be too much or too little because it will affect the appearance of the wall.

5. Finishing

Building a stone wall is challenging because the shape of stone might be different and it usually comes in different sizes. That is why sometimes it leaves some small spaces on the stone wall. The finishing step is to fulfill those spaces with small stones or mortar. The neatness of mortar is also important because that is how the stone wall looks like.

Those all are some steps of building a stone wall. If you have no experience in building the stone wall, it will be better for you to get help from professionals. Installing a stone wall is expensive and you have to prepare for the maintenance as well.

Read More »

Stones have been part of the building structure for decades, as time goes by, the use of stone in buildings has slightly shifted its function into an ornament that adds to the aesthetic value of the building. However, the use of natural stone as a building interior decoration has some drawbacks.

One of the drawbacks is that it is less conventional in the manufacturing process. a solution was found with an innovation, namely artificial stone. The artificial stone is the result of natural stone engineering which has many advantages. Many interesting things can be done with artificial stone, one of which is as an interior decoration.

All About Artificial Stone

Interior decoration plays an important role in comfort in the home. Small touches of interior decoration can change a big thing from the appearance of the house itself. Let’s get to know more about artificial stone and the interesting interior decoration of artificial stone.

1. The superiority of artificial stone Artificial

stone is made of Portland cement and iron oxide pigments as its coloring material. In addition to the material that is easy to find, artificial stone is usually produced in large quantities. This also makes artificial stone always available in large quantities with a simple manufacturing process. Unlike natural stone, which needs to be transported and sorted as well as the selection of stone types. Artificial stone is also relatively cheap compared to natural stone. The average price of artificial stone is $12,188 while the price of natural stone can reach $48. Artificial stone is also lighter than natural stone which makes the installation process easier than natural stone.

2. Diversity

Because artificial stone is the result of engineering, there is no limit in shape or color. So that the resulting product is also more varied and not fixated on any shape or color. This engineering also makes artificial stone no different from natural stone by the naked eye. Artificial stone is also very suitable for various design themes such as monochrome, vintage, cottage core, and others. Artificial stone can also be painted, if you have a great idea you can elevate artificial stone even more.

3. Placement of artificial stone A

room with the right and right color scheme, with perfect interior decoration, can look like a room that gives everyone an atmosphere of joy. The placement of artificial stone can also be adjusted according to individual creativity and taste. One example is in the living room. The living room is a very important part of the interior of a house. Artificial stone will add a lot of character to the interior design, especially in the living room.

The installation of artificial stone with calmer tones will make the atmosphere warmer and more comfortable. This can also add to the comfort of the guests who will come. Another example is to install artificial stone at the entrance of the house. This will create a friendly impression and also welcome future guests. The installation of artificial stone around the swimming pool also gives the impression of being in nature so that it eliminates the boring feeling of a private swimming pool.

Artificial stone is getting more and more popular with the times. In addition to excellence in terms of production, artificial stone also provides freedom of expression for each person while maintaining aesthetic values. In addition to the aesthetic value that can impress family and relatives, the psychological value and energy that can be provided by artificial stone decorations never fail to show a cheerful side.

Read More »

Designing the house with stones will give a natural rustic look to the house. Many people love this look because it reminds us of nature yet is still amazing to look at. However, choosing natural stones as building materials needs lots of considerations.

You need to consider the price, the installation, and also maintenance. Natural stones are expensive and harder to take care of. But you do not need to worry because there is one best alternative for you to get a natural rustic look at a cheaper cost.

Natural Stones Alternative

If you want to have a house natural rustic look but natural stones are way too expensive for you, you get the best alternative. The alternative is using manufactured stone cladding. Nowadays, the veneer stone industry has advanced techniques to produce manufactured stones with much better quality.

You even cannot tell which one is a natural stone and which one is a manufactured stone because the manufactured stone is produced really fine nowadays. The manufactured stones are perfect as materials for interior and exterior design.

What Are the Real Savings of Choosing Manufactured Stone Cladding?

It is mentioned before that manufactured stone is the best alternative to natural stones. Do you know why? There are some benefits you will get by choosing the manufactured stone cladding. Take a look at some benefits of choosing manufactured stone cladding below.

1. It is cheaper

Compared to natural stones, the manufactured stone cladding is way cheaper. You can save around 30% of your budget while choosing the manufactured stone cladding. The cost of manufactured stone cladding is also cheaper than the installation of natural stones.

If your preference is having a natural rustic look but you are limited by your budget, this manufactured stone cladding is really the best alternative. It is perfect for walling, interior design, and even exterior design.

2. It is easier and faster to install

Unlike the natural stone that needs special skill to install, the manufactured stone cladding is way easier to install. That is why it does not need someone who has special skills to install it. The installation also does not require any special equipment.

Because of the easiness of installation, the time you need to install it is also faster. It is even faster compared to the installation of ceramic tiles. It can be done in a day so you do not need to wait for long.

3. It has no wastage

Manufactured stone cladding is produced exclusively and measured precisely. Meanwhile, natural stones must be cut to make them useable and fit into the design. This cutting process will be wasted. By choosing the manufactured stone cladding, you help improve the environment because it has no wastage.

4. It is an extravagant interior design product

The manufactured stone cladding comes in different colors, styles, and patterns. There are lots of choices you may have to match with your design preferences. Even though it is not as unique as natural stones, the pattern of the manufactured stone cladding is still beautiful and fantastic.

Read More »